Jobox Piano Lid Job Site Storage Box (60"L x 31"W x 50"H)
Jobox - Delta Consolidated 1-682990 Piano Lid Job Site Storage Box (60"L x 31"W x 50"H)
NOTE: PURCHASE THREE OF THIS ITEM, SHIPPING WILL BE FREE. YOU MUST CALL US @ 1.800.429.3289 FOR THIS TO BE APPLIED
Usable cubic feet: 47.5
Unmatched Security, Versatility and Durability Site-Vault Security System
Nearly 50% stronger than competitive locking systems:
* 3-Point lock engagement is virtually impossible to bend or pry open
* Fluorescent orange tape indicates when the chest is unlocked
* Bolt cutter proof padlock housing
* Patent Pending
EZ-Loader Skid Bolsters:
* Fork lift-accessible from all sides
* 7-Gauge, one-piece steel bolster construction resists damage when dropped
* Bolsters are fully welded to the box and feature deep embossed reinforcement
* Casters install with 5/16" self-tapping bolts
* Patent pending
Site-Vault Security System:
* 3-Point lock engagement
* Three locking points versus competitive locking systems that only feature two locking points
* Padlock is completely housed in a fully-welded 12-gauge steel casing making it impossible to knock out during an attempted break-in
* Fluorescent orange tape indicates when the chest is unlocked, making it easy to check at night and from a distance
* Patent pending
EZ-Loader Skid Bolsters:
* Forklift accessible from all sides
* Easily load and unload heavy chests from trucks
* Safely move heavy chests to upper levels of buildings
* One piece skid bolster construction reinforces entire box end for heavier load capacity
* Patent pending
2X thicker side walls:
Full pry bar and weather resistant design allows the lid to overlap side walls when closed
Two deep side wall storage bins
Recessed handles:
Extra tall and deep recess areas prevent pinched fingers and damage to the handle
Tilt-N-Stow shelf:
Bottom shelf lifts up and makes it easy to load and unload objects from the base
Gas spring lid lift guard:
Gas springs embedded in sidewall and guard design protect springs, strenthens sidewall and provides 17% more useable shelf space
Staked and welded hinge:
Rugged 14-gauge steel 3/8" continuous hinge with 1/4" steel pin and extra-large 1" knuckles
Staked and welded pin cannot be driven out
Full-Length lock console with three locking points
Recessed handles
Formed lid sides welded to lid bolster resists pry bar entry
Fully staked and welded hinge with 3/8" hinge, 1/4" pin and 1" knuckles
EZ-Loader Skid bolster
Form-in reinforcements strengthen skid bolsters
Door opens a full 90-degrees
Site-Vault with bolt cutter proof lock housing
Fully welded padlock housing
Quick release gas spring removal
Built-in storage bins
Lower front panel to reduce lifting
Tilt-N-Stow shelf
Uses 5/16" self-tapping screws for caster installation
7-Gauge one-piece steel bolster with caster holes
