- Specialized Cutters for 1/2 lb (softwire)- 2 lb (hardwire) Foam
- Heavy-Duty Commercial Quality Foam Planer
- 16" model Weighs Just 13.2 Pounds
- 24" model Weighs Just 17.5 Pounds
- Replacement Brushes Available
- Rugged Air Motor
- Fafnir Ball Bearings on Cutter Shafts
- Air Motors Require 23CFM @ 125 PSI
Motor Requirements:
The pneumatic spray foam motor operates most efficiently when air pressure is maintained at 125psi. An air compressor able to deliver 23.0cfm is necessary. Incoming air should be dry, clean, and filtered. We recommend using a ¾” line from the compressor, the last 20’ use a ½” airline. Lubricate the tool at least once every 8 hours by pouring a small quantity of air motor oil through the air inlet.
Safety:
Although every effort has been made to make the spray foam planer as safe as possible, it is the responsibility of the user to wear appropriate safety gear. Full face respirator and eye protection is a must. As with any power tool, use common sense when operating. Do not wear loose clothing or jewelry that could become caught by moving parts, causing injury.
Weights:
The 16” spray foam planer models weigh 13.20 pounds and the 24” spray foam planer model weighs 17.55 pounds
